"Faulty thermo-regulator loose rivet to spade lug connector causing thermal fault to trip after 5mts use to fit or test this thermal the unit has to be moved out of place to remove back panel, it would have been more logical to have access from top or front, the temp sensing could be moved up 30 mm this would have achieved this"
THERMOREGULITOR
Location Ref: Page: 6
Exploded diagrams, Schematics and other documents
Installation
Philip
QLD
"Faulty thermo-regulator loose rivet to spade lug connector causing thermal fault to trip after 5mts use to fit or test this thermal the unit has to be moved out of place to remove back panel, it would have been more logical to have access from top or front, the temp sensing could be moved up 30 mm this would have achieved this"
Philip
QLD
"Faulty thermo-regulator loose rivet to spade lug connector causing thermal fault to trip after 5mts use to fit or test this thermal the unit has to be moved out of place to remove back panel, it would have been more logical to have access from top or front, the temp sensing could be moved up 30 mm this would have achieved this"
Neil
VIC
"Unplug from electricity, remove back of oven, test for no current, remove 2 wires from thermo-regulator, remove 2 screws holding regulator, replace with new part."
Neil
VIC
"Unplug from electricity, remove back of oven, test for no current, remove 2 wires from thermo-regulator, remove 2 screws holding regulator, replace with new part."
Neil
VIC
"Unplug from electricity, remove back of oven, test for no current, remove 2 wires from thermo-regulator, remove 2 screws holding regulator, replace with new part."
Phillip
VIC
"Part received was smeg 818741478.bw0705506 thermostat 170c. looks to be functional equivalent. renewed burnt connector lug and ensured tight fit. mounted ok on plate. reassembled and tested. has over tempted since at 230c. resets ok but maybe wrong or failing part provided."
Phillip
VIC
"Part received was smeg 818741478.bw0705506 thermostat 170c. looks to be functional equivalent. renewed burnt connector lug and ensured tight fit. mounted ok on plate. reassembled and tested. has over tempted since at 230c. resets ok but maybe wrong or failing part provided."
Phillip
VIC
"Part received was smeg 818741478.bw0705506 thermostat 170c. looks to be functional equivalent. renewed burnt connector lug and ensured tight fit. mounted ok on plate. reassembled and tested. has over tempted since at 230c. resets ok but maybe wrong or failing part provided."