"Ordered online."
FAN ELEMENT
Location Ref: Page: 2
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Denise
VIC
"I had to call a repair man to fix the faulty element i bought from this company."
Steve
QLD
"Remove oven from housing after isolating from power, remove back panel and disconnect wires from element, remove covers from inside oven and remove element, reverse to complete."
Ian
NSW
"Element replacement was very straightforward - all power disconnected"
George
QLD
"Unscrew the back wall panel of the oven, unplug the old element and plug in the new one and refit the back panel"
Rod
VIC
"Remove back panel. remove and replace fan element taking care with wires as connection can loosen."
Jerry
NSW
"Please make sure that the eletrical power is turned off."
Ian
QLD
"Remove cover and bracket screws disconnect wires to element. replace with new element. attach brackets and cover."
Jessica
VIC
"Take the grills out side panel and back panel. unscrew the element from the wall of the oven. remember when removing the old element record which coloured wires attach to which terminal. tip take a photo. attach the wires to the new element. then put all parts (back panel side panel and finally grills) back in the oven."
Mike
NSW
"Super easy to fit - just turn off power to oven. remove screws holding fan cover on. remove screws holding element in place. slide off power wires and refit to new element and then reverse of above"
