"Turn the power off, lift out the side panel with 4 switches, remove the 4 knobs, undo the 4 nuts holding the cover panel to the switches and remove the panel. undo the nut holding the faulty switch, turn the panel over and remove the bottom cover, replace the faulty switch being careful to put the wires on the correct terminals, reassemble, turn the power on and test."
BURNER ASSY;NAT 80;000 BTU
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Barry
NSW
"Turn the power off, lift out the side panel with 4 switches, remove the 4 knobs, undo the 4 nuts holding the cover panel to the switches and remove the panel. undo the nut holding the faulty switch, turn the panel over and remove the bottom cover, replace the faulty switch being careful to put the wires on the correct terminals, reassemble, turn the power on and test."
Gautham
NSW
"Getting electrician to install it."
Gautham
NSW
"Getting electrician to install it."
Graham
SA
"Not yet fitted but no problems envisaged anticipated responses below"
Graham
SA
"Not yet fitted but no problems envisaged anticipated responses below"