"Open the frame, find the part thats leaking, unscrew, refit test, if all good close up and ready to use"
FROTHER SOCKET
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Jessica
WA
"Na"
Paul
QLD
"When removing the screw which holds the silicon seal retaining plate ensure the screwdriver is an exact fit. these damage easily and removal once this occurs is costly"
Malcolm
VIC
"Extremely difficult to extract threaded end of socket having broken off and remaining in boiler housing. brass thread into alloy boiler housing with sealant causes socket to be firmly set in place."
Dianne
VIC
"Remove worn part and replace with new part, only need a few minutes to do this."
Paul
ACT
"Remove the back panel, remove the top panel two screws and a couple of solid thumps on the back toward the front of the machine with flat of hand. release the steamer head four screws, remove the broken frother socket, replace the frother nylon seals, reassemble."
Lee
FLORIDA
"Take off the lid. unscrew old frother. use plumbers tape and screw in new frother. reassemble"
