"Unscrew tip of wand"
O-RING (ORANGE) FOR WAND WRAP SITS INSIDE THE STEAM WAND WRAP
Location Ref: 1.2
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Warren
VIC
"- unscrew steamer wand tip - remove old broken gasket - install new gasket - screw wand tip back on"
Michael
QLD
"Fitment is quite straightforward as sliding on parts."
Jeanne
NT
"Easy to remove the metal cap and replace the orange rubber gasket."
Lynn
NSW
"No explanation required"
Elrond
QLD
"Open back and top of the machine, loosened all screws - note they seem to try and use a different screw on every possible place so dont just dump them all into a big pile. then traced all the wires and as i removed the old wands wire plugged or soldered the new on. insulated the solder joints with shrink tube removed the old wand and put the new one in. zip tied all the ones i remove again and closed it up."
Helen
TAS
"Remove milk wand tip, o ring, and white spacer, then wand shaft, then small o ring. replace all new fitting is reverse."
