"Easy"
FAN FORCED ELEMENT
Location Ref: *
Exploded diagrams, Schematics and other documents
Installation
Alain
QLD
"Screw in place"
John
NSW
"Remove front and back plates from oven and its common sense after that"
Adrienne
NSW
"Unscrew the back plate unscrew the element - remove clips - replace blue wire goes to the top test - screw it all back together."
Hayden
NT
"Remove approximately 4 screws holding the panel covering the oven fan. remove the two screws securing the element. slide the two wire clips off. slide the two wire clips back onto the new element. refit the screws and covers."
Kerry
QLD
"Remove cover 4 screws. remove old element 3 screws and 2 wires. repeat in reverse to install new element."
Matthew
WA
"Part replaced and everything is now working fine"
Benjamin
VIC
"Part easy to fit. unscrew the back unscrew the element clip off the element clip on the new one."