"Instructions on how to fit it would be good we had to use youtube. once you know how to fit it it was reasonably easy"
DISTRIBUTER
Location Ref: 0
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Peter
NSW
"Instructions on how to fit it would be good we had to use youtube. once you know how to fit it it was reasonably easy"
Andre
WA
"No screws - pull the side panels apart at the front to remove the front panel"
Andre
WA
"No screws - pull the side panels apart at the front to remove the front panel"
Jung
NSW
"Remove top cover and take out distributer."
Jung
NSW
"Remove top cover and take out distributer."
Bubs
VIC
"Used the method offered on youtube."
Bubs
VIC
"Used the method offered on youtube."
Darren
SA
"First the outer casing comes off by undoing the three screws holding the case in place. one on the back of the case and two underneath. lift and slightly pull apart the case revealing the inside of the unit. pull the front off of the unit by giving a hard pull as there are clips holding it in place and these are fairly strong. when you have the face off un-clip the distributor and replace with a new item. put everything back in reverse order making sure that no wiring is getting in the way of the case being put back in place. job done"
Darren
SA
"First the outer casing comes off by undoing the three screws holding the case in place. one on the back of the case and two underneath. lift and slightly pull apart the case revealing the inside of the unit. pull the front off of the unit by giving a hard pull as there are clips holding it in place and these are fairly strong. when you have the face off un-clip the distributor and replace with a new item. put everything back in reverse order making sure that no wiring is getting in the way of the case being put back in place. job done"
