"O ring broke"
O-RING
Location Ref: *
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Rick
VIC
"O ring broke"
Jordan
QLD
"Simply remove with fingers or tweezers and replace with new colour coded o-ring"
Jordan
QLD
"Simply remove with fingers or tweezers and replace with new colour coded o-ring"
Claire
ACT
"Remove water tank, lay machine on back, use screwdriver to unscrew the central screw in the centre of the brew head ( not the 4 smaller ones holding the brew head on). prise out the metal disc and old gasket taking note of the way the gasket was sitting. clean the brew head. fit the new gasket over the metal disc so that it is snuggly fitted. put into brew head and replace the screw. stand up the machine and replace the water tank and test. if water leaks down the handle of the group handle or anywhere it shouldnt, repeat the steps above as it means the gasket isnt sitting correctly. when done make a cup of coffee sit back and bask in the glory of a job well done"
Claire
ACT
"Remove water tank, lay machine on back, use screwdriver to unscrew the central screw in the centre of the brew head ( not the 4 smaller ones holding the brew head on). prise out the metal disc and old gasket taking note of the way the gasket was sitting. clean the brew head. fit the new gasket over the metal disc so that it is snuggly fitted. put into brew head and replace the screw. stand up the machine and replace the water tank and test. if water leaks down the handle of the group handle or anywhere it shouldnt, repeat the steps above as it means the gasket isnt sitting correctly. when done make a cup of coffee sit back and bask in the glory of a job well done"
