"Disassemble replace assemble back"
HEAD DRIVE BELT
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Rob
WA
"Dismantle head. exchange part. reassemble"
Peter
QLD
"Split power head, lift motor and fit belt, refit motor and reassemble housing."
Peter
WA
"Easy"
Steve
NSW
"Need to take the head apart and the brush roller out before being able to roll the new belt on, just as you would a bike chain."
Alan
TAS
"We obtained the services of a qualified vacuum cleaner repairer to refit the belt and picked up the repaired item the next day."
Paul
TAS
"Simply dismantle turbo head and fit new belt"
Kevin
WA
"Part is now replaced and is working great"
David
SA
"Simple to unscrew suction head, unclip motor and refit belt."
Raymond
VIC
"Open the head by undoing the 6 torx screws at the bottom of the head, the top comes off with a bit of assistance of a screwdriver between the cover and the bottom part. the brush drive is one assembly that can be levered out from its snap in mount. the drive belt can be slipped of the drive cogs. assembly all reverse new belt on snap the motor assy back into its mount head cover back on done easy as pie."
