"Simply remove original part and replace. this is not a difficult process"
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Michael
QUEENSLAND
"Simply remove original part and replace. this is not a difficult process"
David
QLD
"Need to remove both 4mm allen key bolts in the top from the top of the boiler and remove the steam knob. you will then need to wiggle side to side to break the seal and should then be able to pull out. once out clean up and around the hole then put the o-ring on the steam tap, assemble and put new one in and tighten up the bolts"
David
QLD
"Need to remove both 4mm allen key bolts in the top from the top of the boiler and remove the steam knob. you will then need to wiggle side to side to break the seal and should then be able to pull out. once out clean up and around the hole then put the o-ring on the steam tap, assemble and put new one in and tighten up the bolts"
Felix
VIC
"It needs to be clearer on the website as to whether the parts come with seals o rings etc. as they are listed as complete assembly etc one assumes they do but these are just bare components."
Felix
VIC
"It needs to be clearer on the website as to whether the parts come with seals o rings etc. as they are listed as complete assembly etc one assumes they do but these are just bare components."
