"Removed door and replaced hinge"
HINGE PLATE, BOTTOM RH (BLACK)
Location Ref: Page: 24,26
Exploded diagrams, Schematics and other documents
Installation
Lindsay
VIC
"Remove freezer door first to allow main door to be lifted off and the new door fitted."
Steve
QLD
"Screw gun"
Peter
NSW
"Remove freezer door and then fridge door. tilt fridge back a little to raise front of fridge and slide a piece of timber under to hold it there whilst replacing the hinge plate. place plastic sheet over the open fridge to hold back most of the cold air. with fridge door placed flat on a table unscrew and replace the thimble ensuring that their is still sufficient backing in the hole where the thimble is inserted. replace everything in reverse order."
Chris
VIC
"Take door off. lay fridge on side. remove 2 screws and replace part."
John
QLD
"Remove top and bottom doors, replace thimble and stop door, remove damaged hinge plate and reassemble doors back in sequence."
Leigh
VIC
"2 phillips head screws removed and part replaces easily."
Bruce
QLD
"Easy to medium fix - only two phillips head screws to remove and replace but it is a two man job one to hold the fridge leaning backwards while other replaces hinge mount."
Dawn
NSW
"Empty fridge turn it upside down and attach the part."
Gerry
NSW
"Had used you tube to find out how to replace parts and it looked to be a straightforward job of removing fridge door, replacing thimble, then tilting the fridge to remove the old hinge plate and replace. however the bottom of the fridge door was found to be broken and so a plate had to be made to repair the broken section before the the thimble could be inserted. tried a variety of methods to no avail then used metal epoxy putty to fill the cavity, inserted the thimble and now everything is working well."