""
DRAIN HOSE
Location Ref: Page: 2
Exploded diagrams, Schematics and other documents
Installation
Patricia
VIC
"Remove original hose at both ends then fit new hose exactly the same. put hose clamps on ends before attaching to outlets to ensure good seal. do not over tighten connections."
Josh
QLD
"Remove old hose and replace"
Graeme
NSW
"I removed the leaking drainage hose and fitted the new one. i had to buy a couple of hose clamps to make sure they held in place as the hose did fit the outlet of the dishwasher very neatly. not convinced it was the correct part..but with the hose clamps fitted it works."
Carolyn
NSW
"Connect one end of hose to the dishwasher the other to the pipe outlet"
Sharon
NSW
"I fitted the part"