"Remember how it goes back together - make sure you isolate the appliance from the mains power - look at the exploded diagrams."
ELEMENT
Location Ref: Page: 7
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Alfred
QLD
"Replace faulty heater."
Bruce
QLD
"Removed side panels on dishwasher, located heater exchanger. loosened clamps on the far end of both hoses, removed unit with hoses attached. swapped hoses onto new unit and reinstalled. secured clamps on hoses and connected electrical connection earth connection. re-fitted side panels, tested dishwasher. all good."
John
SA
"Simple replacement. need 2 new hose clamps if you dont own clic pliers."
James
VIC
"The part was very east to remove and replace. i just pulled the dishwasher out, flipped it on its side, removed the bottom plastic that conceals the engine room of the dishwasher. it was as basic as unclipping the clamps."
Scott
VIC
"Access rear of dishwasher - remove 2x hose clamps with multi-grips, replace part, reinstall hose clamps and base"
Paul
SA
"Screwdriver to take off back of dishwasher, easy to install. element connected to pipes"
