"Spring to mechanism to assist door operation"
DOOR SPRING
Location Ref: Page: 3
Exploded diagrams, Schematics and other documents
Installation
Damien
WA
"You need to remove the side panel after you remove the top panel - changing the spring is fairly simple especially when you use the other side to confirm placement. if you need to tighten the springs you need to remove the door front panel to be able to remove the lower front panel. it gets a bit confusing but screw placement is fairly easy to locate phillips head and torx head t15"
Andrew
NSW
"Download the parts diagram and try to interpret from there. you need to take the top and side panels off. hopefully you get the right side with the broken spring first."
John
VIC
"Parts installation did not require any detailed knowledge or abilities."
Doug
QLD
"Take skin from dishwasher to replace the door springs and adjust."
John
VIC
"Removed outer panels, fitted new springs, replaced outer panels"
Garry
QLD
"Took the side panels off and installed the new door springs"
Ian
QLD
"Omega dishwasher door spring: simply remove screws holding side panel in place and u will have full access to the door spring, very easy to replace, u just need a phillips head and a star screwdriver for this job"