"Turn off power to oven. remove racks from inside oven. remove fan and element cover from back of inside oven. remove oven from cupboard cavity. remove back cover. disconnect power wires from element. remove nuts holding element in place. unscrew top screw holding element in place on inside of oven. then install the new element in the reverse order."
FAN FORCED ELEMENT
Location Ref: Page: 2
Exploded diagrams, Schematics and other documents
Installation
Peter
SA
"Not the original part supplied so no direct replacement. drill new mounting holes and used the nuts and bolt supplied in the universal element kit. your web site displayed the original part in a photo which was not the part supplied."
Ben
QLD
"Turn off circuit breaker to oven, remove oven door by flipping up hinges. remove racks. remove back plate inside oven. pull oven out from wall, remove back guard, pull wires off element and remember their positions. undo nuts on element, pull element out from inside oven, fit new element and put back together"
Adam
QLD
"Cant fit something you dont get"
Adam
TAS
"Remove door, remove racks and rails, remove inner rear cover -2 screws - remove element and replace with new unit, replace cover, rails, racks and door"
Tony
VIC
"Access from front and partially from the rear"
Narelle
NSW
"Turn power off and then easy to fit"
Allyson
SA
"No"
Josh
VIC
"Isolate. unscrew covers (insideback), remove element. install and secure new element. install covers."
Suzanne
SA
"Fit a part bought from another supplier as this company packages insufficiently and the element arrived damaged on both occasions"