"Carefully check the wiring for burn marks burnt plugs etc..."
OVEN THERMOSTAT
Location Ref: Page: 5
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Darren
TAS
"Isolate all power and gas to appliance, remove all control knobs and buttons from the front of the appliance, remove the front and back covers from appliance. remove 2 screws holding the thermostat in and pull thermostat through hole to expose wiring and capillary tube. disconnect capillary tube from holding clamps in oven disconnect wiring, note where wires connect to pull thermostat out completely from appliance. install in reverse order. ensure capillary tube is not touching any exposed terminals when reinstalled as this will cause electric shock and damage to the appliance."
Leonie
QLD
"Electrician required"
Peter
VIC
"Take off the oven back panel and the side panel nearest the thermostat. take off panel behind the oven knobs. remove thermostat and refit."
Alex
NSW
"Best left to a qualified electrician or appliance technician."
Nigel
NSW
"Also remove left side panel for better access to installation"
Paul
WA
"Took longer to find where id hidden the kick plate than fitting the clips"
Gary
NT
"Isolate power gas. pull front control knobs cover off remove rear panel. replace thermostat. refit everything"
Mark
QLD
"Still waiting on delivery"
Stephen
NSW
"Remove old parts with screwdriver, fit new parts"
