"Depends on the person."
THERMOSTAT
Location Ref: Page: 7
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Sharon
SA
"Tools"
Simon
VIC
"Switch the power off. remove the rear cover. the thermostat is attached to the front temperature dial and two heat sensors are attached to clips in the oven."
James
ACT
"Removed back and top of oven, unscrewed old thermostat and put in new... removing the top panel with all the gas outlets took time but not too hard"
Trevor
VIC
"Havent done it yet"
Oral
VIC
"Fitting the thermostat was quite simple - once the old part was removed it was easy to follow the same steps in reverse. however my original thermostat had a sleeve that covered most part of the exposed capillary except the heat sending end. this was the only section that took me some time to cover."
Brett
NSW
"Call a electrician"
Graham
NSW
"The faulty parts are hard to get at. the stove needs to be pulled away from the back wall the stovetop needs to be removed. unfortunately the thermostat i received was faulty. normally when you turn the dial for the thermostat which selects the oven mode a distinct click step can be heardfelt. this was not occurring with the thermostat i received. fortunately the tradesman undertaking the repair had similar replacement parts in his workshop was able to complete the repair. i will return the faulty thermostat request a refund."