"Plug and play"
HOPPER ASSEMBLY
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Robert
QLD
"Firstly turn the machine off, unplug from the wall and let it cool down. get a small philips head screwdriver and unscrew the small screw which is holding the metal filter grid on in the brew head assembly. use a thin screwdriver to gently ease off the 1st grid. ease the 2nd grid out with a thin screwdriver. ease the brew head seal out of the machine and dispose. clean the 2nd grid of coffee residue and also clean out the cavity of the coffee machine. place the new brew head seal ridge side up on a flat surface and place the 2nd grid into the seal then replace the seal back into the machine. take the 1st grid and clean thoroughly on both sides. replace back into the unit cup side up and re-secure with the screw being careful not to overtighten."
Graham
WA
"Simply screwed hopper on"
Sandie
QLD
"Easy to follow"
Paul
WA
"Na"
Selwyn
VIC
"Simple replaced old with new."
Matt
NSW
"Easy replacement"
Marjorie
VIC
"Simple replacement of broken hopper which i was able to fit easily"
Lee
WA
"Just twist it on"
Rob
QLD
"Simply replace the hopper"
