"Simply undo one screw"
2 x BREW HEAD SEALS
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Cath
QLD
"Using a screwdriver undo the part and replace with the new brew head seal."
Hans
NSW
"Remove screw on brew head, take off brew head, replace seal, fit brew head again"
Scott
NSW
"The metal screen needs to be removed and thoroughly cleaned before installing new seal and refit."
Michael
QLD
"Unscrew head, take off seal, replace and re fit"
Mark
SA
"Unscrew the screw in the center of the brew filter. remove the brew filter and seal with a cloth, remove the worn seal and clean the brew seal, place the new seal on the brew filter and tighten firmly - do not over tighten"
Leeann
QLD
"Take note of which way old seal was fitted as you remove brew head"
James
QLD
"Remove overflow tray and water tank, turn the machine over. unscrew single screw in the middle of the silver mesh and remove, you may need a thin screwdriver or a table knife also works fine. take out the old filter put the new one in."
Lou
WA
"Remove old seal. wipe area to make sure its clean. insert new seal."
Kent
NSW
""
