"Replaced whole filter handle"
FILTER HANDLE ASSY EM6900-6910-R
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Robert
QLD
"Firstly turn the machine off, unplug from the wall and let it cool down. get a small philips head screwdriver and unscrew the small screw which is holding the metal filter grid on in the brew head assembly. use a thin screwdriver to gently ease off the 1st grid. ease the 2nd grid out with a thin screwdriver. ease the brew head seal out of the machine and dispose. clean the 2nd grid of coffee residue and also clean out the cavity of the coffee machine. place the new brew head seal ridge side up on a flat surface and place the 2nd grid into the seal then replace the seal back into the machine. take the 1st grid and clean thoroughly on both sides. replace back into the unit cup side up and re-secure with the screw being careful not to overtighten."
Andrew
NSW
"As you would with the original group handle"
Kerry
WA
"Replacement group head"
Amanda
WA
"Fitting not required - is a separate part"
Jay
VIC
"Pull straight off - notched."
Virginia
NSW
"Just goes in"
David
ACT
"Replace group handle"
Heather
QLD
"Replace where old part was before"
Ian
VIC
"Just needed spare to make more coffee without having to go to grinder as often just offer up to shower head collar"
