"Changing the part is as easy as disconecting two small electrical plugs and inserting the replacement the tricky bit is in taking the machine apart to get access. start by pulling off the steamer knobs and unscrewing the steam valves like changin a tap washer remove screws holding the top panel and back panel on trace the switch from the steamer control to the circuit board nb short wire is for the frother wand long wire is for the hot water dispenser. carefully cut the zip tie in the centre of the wire and remove. with scissors split the insulation tube and remove old wire. wrap insulation tube around new wire and tape up. insert plug into circuit board and microswitch into housing. put everything back together and your away."
