"Push handle upwards to remove from the door. use a socket driver to remove screws from broken mounting brackets and phillips head screwdriver to remove white door handle inserts if broken. replace with new brackets and inserts. re-screw and push handle downwards to re mount."
PEDESTAL HANDLE Kit of 3 (STAINLESS NLA)
Location Ref: 1
Exploded diagrams, Schematics and other documents
Installation
Albert
NSW
"1. take off door handle by hand - pull up and out front. 2. unscrew the single hex screw in each mounting block and take out old mounting block. 3. align and install new mounting blocks using the old hex screws. 4. attach door handle by hand - align with the mounting blocks then push in and down until it clicks in."
Rodney
ACT
"Lift handle up to remove it. then unscrew the handle bracket and replace."
Lorinda
WA
"It was really easy to fit the new parts and put the handle back on."
Mick
NSW
"Nil"
Damian
NSW
"Easy to fit"
Paul
TAS
"Remove handle, unscrew the cracked mount, replace with new and reattach the handle."
Jeff
WA
"Lift handle bracket upwards and remove. unscrew broken mounting blocks and replace. refit handle bracket"
Kasey
QLD
"They just clip on"
Shaun
VIC
"Remove handle by pulling it in upward direction. brackets can then be removed with socket set."