"Dismantle cover by unscrewing two phillips head screws. take cover off. disconnect old thermostat by pressing on plastic. click new part into place. then place part in the position of the old part."
D.T.T. 11ºC CUT OUT
Location Ref: 1
Exploded diagrams, Schematics and other documents
Installation
Russell
NSW
"Powered off the fridge. removed the plastic cover in the freezer section two screws. unplugged the old thermostat and plugged in the new one and used a new zip tie to keep in place."
Daniele
NSW
"Very good thank you - easy to fit"
Bernie
NSW
"Defrost freezer, remove back plate in freezer compartment - two phillip head screws, use long-nose pliers if necessary to help remove back plate. unplug old thermostat, remove plug in new thermostat, replace in same position as old one. replace back cover. job done. good luck"
Gary
WA
"Remove back cover in freezer, removed old part from evaporator, fit new, fasten with cable tie. fit back cover and do up screws."
Zainor
VIC
"Unplug the old one and attach the new one."
Warren
WA
"Replacement part"