"Have handy husband"
INSERT HANDLE PEDESTAL (PACK OF 3)
Location Ref:
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Stuart
QLD
"Tap handle up with wood block. use 7mm socket to remove pedestal and put on new ones. clips on with phillips head . easy."
Stephen
NT
"The long door handle is removed by lifting it up - this allows the mounting clips to come off the three mounting brackets. the mounting bracket is held onto the door with a small bolt that is removed using a 14 inch socket. fit a new bracket and tighten the small bolt. the mounting clip is held onto the long handle with a screw use a philips head screw driver to remove the screw and install a new mounting clip. to refit the long handle hold it against the three door brackets and push it down until all the clips engage in the mounting brackets. easy to do."
Colin
NSW
"Just need a screwdriver"
Jan
NSW
"Door handle came off"
Craig
NSW
"Unscrew broken parts, screw on new ones, slide handle into place"
Richard
CHRISTCHURCH
"Straightforward configuration."
Michael
QLD
"Note orientation of old mounting clips prior to removal."
