"Pop switch out with a small pick or screw driver"
SWITCH, LAMP
Location Ref: 1
Exploded diagrams, Schematics and other documents
Installation
Stacey
QLD
"Pull old switch out, take 2 wires off, conect them to new switch and push new switch in."
Vicki
QLD
"Got info on fitting part on you tube which was brilliant."
John
QLD
"Easier than expected"
Craig
QLD
"Remove the power from the fridge. slide a butter knife on the top and then bottom of the switch whilst pulling on the switch and it will pop out. remove the switch and connect the wires at the back of the switch one at a time to ensure the cable does not drop into the cavity. push new switch into place and power the fridge to test."
Brad
QLD
"Disconnect electricity. use flat screwdriver to carefully pry out the switch. gently pull one of the connecting wires off the back of the old switch and connect to the new switch. then repeat with the remaining wire. place new switch in to the cavity where the old switch was."
Ian
QLD
"Na"