DOOR HINGE THIMBLE, LOWER

"Removal of the old thimble cam from the bottom of the door was impossible due to extreme wear. it was pushed up higher inside the door cavity then the new cam was then easily fitted."

"Remove the top bracket. lift the door."

"Remove all shelves products from door. remove top screw and hinge cover. undo hinge bolts. remove door and invert. remove two screws and plate. remove broken thimble cam replace all parts in reverse order."

"Remove all goods from the door. unbolt and unscrew the door and remove. lay door on side and remove old part and insert new."

"I found it very annoying that you do not alow contact by phone. it took several weeks of emails back and forth to find the correct item i required. this all could have been sorted in a few minutes with a phone call. your postage fees are rediculous i was charged nearly the cost of the item in freight."

"Remove all the shelves from the door. close the door. remove top plastic hinge cover with philips screwdriver. remove the three screws holding the top hinge. lift the hinge up and put aside. remove the door and lay on a flat service. i used the lounge chair so i would not damage the paint. remove the door stop then pull out broken cam ( easier with o ring picks) replace with new cam. from here reassemble in reverse order before tightening the three screws on the top hinge - make sure the door is aligned straight up and down, replace the cover. test."

"Take top screws from mounting bracket at top of drawer. take door off and replace part."

"Take the fridge door off, replace part and re-attach the fridge door."

"Removed top hinge - lifted door of - slid out broken parts and replaced with new - replaced door and reattached top hinge"

"No"