"Lift out old.....simply slot in new"
WATER FILTER - FLOW THROUGH - TUBING PUSHES ONTO CONNECTION - NOT A SCREW THREAD
Location Ref: 1
Exploded diagrams, Schematics and other documents
Installation
Matthew
QLD
"Screw the rail on with existing screws"
John
VIC
"Replace"
Damian
QLD
"Replace water filter"
Mark
QLD
"Pull on bottom of ice maker cover to remove, remove two mounting screws at front edge of ice maker, lever down retaining clip located between the two screws then slide ice maker out and disconnect electrical plug. reverse procedures to install"
Frits
CHRISTCHURCH
"Excellent service. speedy delivery. will purchase again."
Adam
VIC
"Excellent service. turn off the water and power supply. unscrew the ice component and disconnect the wiring. pull out the faulty parts. reconnect the wiring to the new parts and screw back in. turn the water and power supply back on."
Scott
NSW
"Hi the shelf has turned up and it was cracked. how do we go about getting one that is ok."
Deb
SA
"Turn off water supply at tap, remove old filter and attach new filter. turn on water, run until water runs clear. done"
Alex
QLD
"Outlined well in product instructions. ensure water is turned off first."