"Although awkward to access the part was easily removed and replaced."
CONTROL BOARD BUZZER ASSY
Location Ref: 1
Exploded diagrams, Schematics and other documents
Installation
Roy
QLD
"The part was fitted with a lot of patience, however it was fitted by laying the freezer on its side and removing the drip tray but it still went back with only one screw"
Nathan
WA
"2 screws to remove assy needed to tilt fridge forward at 45 degree angle, have someone hold it to access difficult to reach screw through the bottom"
Harry
WA
"Remove power cord from socket. take out two screws from pcb box disconnect wiring connections. plug in wiring to new pcb box refit box ."
John
SOUTH AUSTRALIA
"Remove bottom rear panel. remove two control board mounting screws (not easy). pull out board, unplug three connections. connect those 3 connections onto new board. put board back into position, tighten two mounting screws."