LAMP, FRIDGE

"My husband did it i think i just clicks in."

"Very easy the shelves slotted right in. the globe was simple to instal behind the protective cover."

"Turn off power supply take off cover remove light bulb install new light bulb replace cover turn power back on"

"Just follow the instructions in the refrigerator manual to fit the light. its very easy."

"Turn off and unplug fridge. only need to unclip plastic light cover being careful not to break plastic retainers. unscrew old lamp and screw in new one."

"Pull shelves out and take out lamp cover. replace lamp."

"We removed the old globe and fitted the new one. the new one looked a bit bigger but the screws fitting was the same so it went in ok"

"1 phillips head screw inset to remove and replace each bracket. align locator points molded on the underside of bracket before tightening screw. handle slots into brackets top to bottom via provided screw in lugs on underside of the handle. lamp bulb screws into socket behind light cover near thermostat control. cover unclips top to bottom and reverse order to replace."

"Turn off appliance. remove lamp cover. unscrew old lamp screw in new lamp. wait 5 minutes for gases to settle. turn on refrigerator."

"Simple edison screw base incandescent lamp. first record temperature settings in both food and freezer compartments. then switch off and disconnect the refrigerator completely. remove the front bulb compartment cover at the back of the food compartment. screw the old lamp out and the new one in. replace cover. reconnect fridge to power and switch on check the light is working. reposition fridge correctly if it was initially moved to access the mains power point. reset the compartment temperatures if necessary."