"The part was easy to fit it slipped onto the metal shaft"
CAP SUSP ROD
Location Ref: 1
Exploded diagrams, Schematics and other documents
Installation
Karen
QLD
"The part was easy to fit it slipped onto the metal shaft"
Jeff
NSW
"Control panel has to be removed, 3 screws then 2 screws under are removed and 2 screws under rubber caps at top front. upper panel then moved to allow access to cap of suspension rod - best if washer is laid down"
Jeff
NSW
"Control panel has to be removed, 3 screws then 2 screws under are removed and 2 screws under rubber caps at top front. upper panel then moved to allow access to cap of suspension rod - best if washer is laid down"
Jack
NT
"Fit suspension rods to tub"
Jack
NT
"Fit suspension rods to tub"
John
QLD
"The lower bearing was failing and very noisy. the cap in the ratchet cluth was broken. i replaced the bearing and ratchet cluth parts and the machine is back to normal."
John
QLD
"The lower bearing was failing and very noisy. the cap in the ratchet cluth was broken. i replaced the bearing and ratchet cluth parts and the machine is back to normal."
Raymond
WA
"Not needed"
Raymond
WA
"Not needed"