"Pulled out dishwasher disconnect hose form water inlet pipe disconnect house from machine and replaced."
HOSE ASSY., INLET (HOT)
Location Ref: A15
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Bill
NSW
"Unscrew old hose and replace"
Robert
NSW
"Easy to apply"
David
NSW
"Easy fix - just removed old hose and screwed new hose to tap and dishwasher. no tools required."
Stephen
QLD
"Screw both ends of hose on"
Nigel
NSW
"Water spraying at hose connections because of broken plastics inner hose ends. straight forward swap of hoses."
Dwayne
NSW
"Pull dwasher out and remove hose, push washer back"
Wendy
VIC
"Fitting the drain pipe you will need to remove the screws from the outer case of the dishwasher and remove the pipe from internal - be careful as the cover has sharp edges. pull the pipe out and when fitting the new pipe and make sure that you push it up as far as it goes and do a couple of runs before you replace the covers checking for leaks."
Martina
QLD
"Remove and replace one tube at a time and put old tube straight into the sink because water will spray out."
Patrick
NT
"Easy to swap hoses over"