"Unscrew bolt in agitator, remove old one then replace with new one. use a new bolt if possible"
AGITATOR ASSY (INC. ITEMS 2 3)(SPARES REPLACEMENT)
Location Ref: 1
Exploded diagrams, Schematics and other documents
Click on an image to enlarge the exploded view
Installation
Ben
NSW
"Need 300mm socket extension to remove bolt. simply slide off agitator from pinion. slide on new one, push to end. place bolt in hole tighten firmly. test operation."
David
VIC
"Pull out filter, use socket wrench with extension, unscrew nut in the middle"
Tracy
WA
"It was very easy to remove but a section had broken off which my husband managed to get out. the new part itself was then very easy to fit."
Natalie
VIC
"By hand"
George
SA
"Noscumbag rip off parasites sell used parts as new . never shop here they are ankles . three foot lower than a c-t . i hope there warehouse is distroyed for the bull-itthey cause"
Jonathan
NSW
"Remove the agitator securing bolt located under the lint bag assembly and replace agitator"
Jason
NSW
"Remove the broken agitator with a wrench - youll need a long extension adaptor to get down to the bolt which is located in the shaft of the agitator."
Christine
WA
"Remove old agitator and replace. very simple"
Mark
NSW
"Broken piece of agitator needed to be removed - very difficult"
